Top case lower section, red Only for Rolektro and Libremo models where the chassis number (VIN) begins with R31.... Trike 15 V.3 Trike 25 V.3 Quad 15 V.3 Quad 25 V.3

The opaque and durable cover provides your electric mobility scooter with reliable protection against weather conditions, dirt, and scratches. Made from high-quality material (Oxford 210D with PVC coating), the tarpaulin is water-repellent, tear-resistant, and abrasion-resistant—perfect for everyday indoor and outdoor use. The protective cover is double-stitched and the seams also have a waterproof coating on the inside. For maximum visibility, the senior mobility scooter cover is equipped with reflective strips at both the front and rear. These reflective elements increase your safety, especially in the dark or in poor lighting conditions. In addition, practical fastening straps at the front and rear ensure a secure hold, so that the rain cover remains securely in place even in windy conditions. Thanks to its compact pack size and low weight of approx. 1250 g, the cover is easy to store and transport. A compact storage bag is included, in which the e-mobile garage can be stored when not in use. This cover has been specially developed and tested to meet the highest standards. This versatile protective cover is the ideal choice for Rolektro e-mobiles and similar models. The mobile garage protects against rain, dust, UV rays, and other influences, extending the life of your vehicle. - Opaque cover for three/four-wheeled Rolektro electric mobility scooters and similar models - Water-repellent, tear- and abrasion-resistant - With fastening straps at the front and rear - Cover (LxWxH): approx. 110 x 52.5 x 100 cm - Pack size (LxWxH): approx. 32 x 32 x 6 cm - Length of fastening straps: approx. 18 cm - Weight: approx. 1250 g - Color: anthracite (black) with reflective strips - Material: 20% polyester / 80% PVC (polyvinyl chloride) IMPORTANT NOTE: Please measure your vehicle before ordering!

Only for Rolektro model Fun20 V.2

TRONJE 9L Lithium Fire Extinguisher Conventional fire extinguishers are often not suitable for lithium-ion battery fires. The TRONJE 9L fire extinguisher was specifically developed for modern battery fires and effectively extinguishes lithium-ion batteries without causing reignition. Thanks to its larger capacity and higher extinguishing performance, this model is particularly suitable for workshops, storage areas, commercial facilities, vehicle fleets, e-bike and e-scooter stations, as well as industrial applications with heightened safety requirements. The fluorine-free extinguishing agent is biodegradable, non-toxic, and non-corrosive. At the same time, the fire extinguisher impresses with its high extinguishing performance, ease of use, and minimal, easily removable extinguishing agent residue. The ergonomic nozzle ensures an optimal spray pattern and precise application in an emergency. At a glance: Specially developed for lithium-ion battery fires Proven to prevent reignition Tested in accordance with NTA 8133 Certified to DIN EN3-7 & EN3-10 Fluorine-free – contains no PFOA, PFOS, or other fluorine compounds Biodegradable, non-toxic, and non-corrosive Extinguishing rating: 21A Li Capacity: approx. 9 liters Extinguishing agent: 0.18 L XF3000 + 8.82 L water Operating pressure: approx. 10 bar Test pressure: approx. 27 bar Propellant: Nitrogen (N₂) Temperature range: +5 °C to +60 °C Tank material: High-quality steel in accordance with EN 10130 Hose material: EPDM rubber Fire extinguisher dimensions: approx. Ø180 × 500 mm Total height: approx. 610 mm Packaging dimensions: approx. 190 × 215 × 615 mm Weight: approx. 14.3 kg With ergonomic nozzle for optimal flow control Extinguishing agent jet can be stopped at any time Includes wall mount The high-performance safety solution for modern battery and e-mobility applications with increased protection requirements.

Only for Rolektro model E-Joy 20 Attention! There are two different versions available; this bracket is only suitable for the E Joy model with rear swing arm A. No. 32620 and luggage rack A. No. 32624. Please check this before ordering.

Cable ties – versatile everyday helpers for organization and safety Cable ties, also known as cable bands or cable straps, are universal, quick-to-use, and inexpensive fasteners that were originally developed for securing cables and cable harnesses. Today, they are indispensable in industry, trade, household, and even horticulture. The durable cable ties are not only used for bundling and organizing cables, but also for temporary assembly, as a packaging aid, or even as emergency handcuffs in the security sector. Our high-quality Hermax cable ties made of robust nylon PA66 (polyamide 66) in black offer a reliable and versatile solution for bundling and fastening cables, wires, hoses, pipes, components, garden plants, and much more—both indoors and outdoors. Suitable for household, garden, creative hobbies & DIY projects, workshops, trade fair construction, electrical installations, automotive applications, and many other uses, our nylon cable ties impress with their excellent load-bearing capacity, weather resistance, and versatility. Technical data: Set contents: 1000 pieces (various lengths and widths available) Length x width: 100 x 3.6 mm Material: Nylon PA66 (polyamide 6.6) Temperature range: -40°C to +85°C Tensile strength: Up to 18 kg / 40 lb Bundle diameter: 3.5 mm to 20.5 mm Color: Black (UV-resistant) Standards: UL-94 V2, RoHS, etc. Cable ties work on a simple but effective snap-lock principle: a toothed strip is pulled through a head with a snap-lock element and locked in place so that the tie cannot come loose by itself. The reusable models also feature a release mechanism for loosening and resealing. Cable ties are practical and safe when used properly. Observe the load limits, avoid excessive tightening, and ensure safe disposal. This will minimize risks to people and materials. How to use a cable tie correctly 1. Select a cable tie in the appropriate length and width for your project. Make sure that the tie is long enough to enclose the entire bundle. 2. Ensure that the cables or objects are clean and neatly arranged. Remove any dirt or excess material so that the cable tie holds optimally. 3. Pass the pointed end of the cable tie around the cables or objects and insert it through the opening in the head of the cable tie to form a loop. 4. Pull the end of the cable tie slowly and evenly until the bundle is held securely together. Be careful not to pull too tightly to avoid damaging cables or material. With reusable cable ties, you can release the locking mechanism later. 5. Cut the excess end of the cable tie flush with the head to avoid sharp edges and prevent injury. Special cable tie pliers can tighten and cut in one step. Safety instructions - Hermax cable tie sets may only be used within their specified load limits and for their intended purpose. - Do not use cable ties as a substitute for safety-related fastenings such as straps or load-bearing connections. - Do not tighten excessively to avoid damaging cables or bundled items - Always ensure that the cut end does not leave any sharp edges - Never cut plastic cable ties with a carpet knife or sharp tools, as this can easily damage cables or pipes - Store cable ties in a dry place at a constant temperature - Keep cable ties away from small children, as there is a risk of swallowing and strangulation - Cable ties should be disposed of in plastic waste after use. Ensure environmentally friendly disposal to avoid pollution

Only for Rolektro models E-Trike 6 and E-Quad 6

Keep your personal belongings safe and secure while you're on the go with our lockable case for senior mobility scooters. This reliable rear case is the ideal solution for anyone who needs extra storage space for their shopping or personal items. Made from sturdy plastic, this top case is temperature-resistant and weatherproof, so your belongings are always protected when you're on the go. With a volume of approx. 35 liters, it offers enough storage space for your handbag, small backpack, groceries, medication, personal items, and much more. The practical storage case is equipped with a red reflector in the form of an emblem, which provides additional visibility and safety. The padded, ergonomically shaped backrest provides additional comfort and support while riding. The lockable function of the luggage rack ensures additional security for your valuables while riding. The rear carrier comes complete with mounting accessories for quick and easy installation. Technical data: Dimensions (LxWxH): 47.5 x 36 x 22 cm Volume: approx. 35 liters (perfect for small handbags and backpacks) Weight: 2.2 kg Maximum load capacity: 8 kg Material: 90% plastic, 10% metal Please note: The lock is NOT included in the scope of delivery! The top case is compatible with Rolektro and Libremo vehicle models with a chassis number (VIN) beginning with "R31": - E-Trike 15 V.2, E-Quad 15 V.2, E-Trike 15 V.2, E-Trike 25 V.2 - E-Trike 15 V.3, E-Quad 15 V.3, E-Trike 15 V.3, E-Trike 25 V.3 The transport case can also be attached to comparable vehicles from other manufacturers. However, please note that there may be differences and incompatibilities with vehicles from third-party manufacturers. Any damage resulting from this is not covered by the warranty. Maintenance and care instructions: Pay attention to the maximum permissible load capacity of the case so as not to overload it and avoid damage to the mounting points. Regularly check the attachment of the rear case to your senior mobility scooter to ensure that it is firmly and securely attached. Wipe the rear case regularly with a soft, damp cloth to remove dirt and dust. Avoid contact with sharp objects or aggressive chemicals to prevent scratches or damage to the surface. You can find suitable and optimized cleaning agents specially developed for our electric vehicles in the accessories section below:

Dieses Set enthält den Heckkoffer, den passenden Gepäckträger sowie das Befestigungsmaterial für Ihren E-Scooter. Hinweis zum Zahlenschloss: Der Werkscode zur Erstöffnung lautet 000. Das Schlüsselloch dient ausschließlich behördlichen Kontrollen (TSA). Ein Schlüssel wird nicht mitgeliefert.

Cable ties – versatile everyday helpers for organization and safety Cable ties, also known as cable bands or cable straps, are universal, quick-to-use, and inexpensive fasteners that were originally developed for securing cables and cable harnesses. Today, they are indispensable in industry, trade, household, and even horticulture. The durable cable ties are not only used for bundling and organizing cables, but also for temporary assembly, as a packaging aid, or even as emergency handcuffs in the security sector. Our high-quality Hermax cable ties made of robust nylon PA66 (polyamide 66) in black offer a reliable and versatile solution for bundling and fastening cables, wires, hoses, pipes, components, garden plants, and much more—both indoors and outdoors. Suitable for household, garden, creative hobbies & DIY projects, workshops, trade fair construction, electrical installations, automotive applications, and many other uses, our nylon cable ties impress with their excellent load-bearing capacity, weather resistance, and versatility. Technical data: Set contents: 1000 pieces (various lengths and widths available) Length x width: 130 x 2.5 mm Material: Nylon PA66 (polyamide 6.6) Temperature range: -40°C to +85°C Tensile strength: Up to 8 kg / 18 lb Bundle diameter: 3 mm to 30 mm Color: Black (UV-resistant) Standards: UL-94 V2, RoHS, etc. Cable ties work on a simple but effective snap-lock principle: a toothed strip is pulled through a head with a snap-lock element and locked in place so that the tie cannot come loose by itself. The reusable models also feature a release mechanism for loosening and resealing. Cable ties are practical and safe when used properly. Observe the load limits, avoid excessive tightening, and ensure safe disposal. This will minimize risks to people and materials. How to use a cable tie correctly 1. Select a cable tie in the appropriate length and width for your project. Make sure that the tie is long enough to enclose the entire bundle. 2. Ensure that the cables or objects are clean and neatly arranged. Remove any dirt or excess material so that the cable tie holds optimally. 3. Pass the pointed end of the cable tie around the cables or objects and insert it through the opening in the head of the cable tie to form a loop. 4. Pull the end of the cable tie slowly and evenly until the bundle is held securely together. Be careful not to pull too tightly to avoid damaging cables or material. With reusable cable ties, you can release the locking mechanism later. 5. Cut the excess end of the cable tie flush with the head to avoid sharp edges and prevent injury. Special cable tie pliers can tighten and cut in one step. Safety instructions - Hermax cable tie sets may only be used within their specified load limits and for their intended purpose. - Do not use cable ties as a substitute for safety-related fastenings such as straps or load-bearing connections. - Do not tighten excessively to avoid damaging cables or bundled items - Always ensure that the cut end does not leave any sharp edges - Never cut plastic cable ties with a carpet knife or sharp tools, as this can easily damage cables or pipes - Store cable ties in a dry place at a constant temperature - Keep cable ties away from small children, as there is a risk of swallowing and strangulation - Cable ties should be disposed of in plastic waste after use. Ensure environmentally friendly disposal to avoid pollution

Keep your personal belongings safe and secure while you're on the go with our lockable case for e-scooters. This reliable rear case is the ideal solution for anyone who needs extra storage space for their shopping or personal items. Made from sturdy plastic, this top case is temperature-resistant and weatherproof, so your belongings are always protected on the go. With a volume of approximately 45 liters, it offers enough storage space for your handbag, small backpack, groceries, medications, personal items, and much more. The practical storage case is equipped with a red reflector for added visibility and safety. The ergonomically shaped backrest provides additional comfort and support while riding. The double lockable function of the luggage rack ensures additional security for your valuables while driving. The rear carrier comes complete with 2 keys and mounting accessories for quick and easy installation. Caution! Never leave both keys in the top case! Technical data: Dimensions (LxWxH): 43 x 40 x 27 cm Volume: approx. 45 liters (perfect for small handbags and backpacks) Weight: 1.8 kg Maximum load capacity: 8 kg Material: 90% plastic, 10% metal The top case is compatible with Rolektro vehicle models: - eco-City 20 V.2 - eco-City 45 V.2 The transport case can also be attached to comparable vehicles from other manufacturers. However, please note that there may be differences and incompatibilities with vehicles from third-party manufacturers. Any damage resulting from this is not covered by the warranty. Maintenance and care instructions: Pay attention to the maximum permissible load capacity of the case so as not to overload it and avoid damage to the mounting points. Regularly check the attachment of the rear case to your senior mobility scooter to ensure that it is firmly and securely attached. Wipe the rear case regularly with a soft, damp cloth to remove dirt and dust. Avoid contact with sharp objects or aggressive chemicals to prevent scratches or damage to the surface. You can find suitable and optimized cleaning agents specially developed for our electric vehicles in the accessories section below:

The spacious 100L thermobox in the rear can hold plenty of food and drinks. This reliable thermobox is the ideal solution for anyone who needs extra storage space for their shopping or food. Made of sturdy plastic, this XXL luggage rack is temperature-resistant and weatherproof, so your belongings are always protected on the go. The double-walled case has good insulating properties and can maintain a constant internal temperature for up to 4 hours. A cool box or warm box on an e-scooter is practical for delivery services, commuters, or trips where food or drinks need to be transported without losing their temperature. The lockable function of the food transport container ensures additional security for your valuables while on the move. The insulated box comes with 2 keys. Caution! Never leave both keys in the transport case! Technical data: Dimensions (LxWxH): 50 x 49.5 x 47 cm Volume: approx. 100 liters Weight: 7.5 kg Maximum load capacity: 22 kg Material: 90% plastic, 10% metal The top case is compatible with Rolektro vehicle models: - Carrier 25 Lead-Gel - Carrier 25V.3 Lithium The transport case can also be attached to comparable vehicles from other manufacturers. However, please note that there may be differences and incompatibilities with vehicles from third-party manufacturers. Any damage resulting from this is not covered by the warranty. Maintenance and care instructions: Pay attention to the maximum permissible load capacity of the case so as not to overload it and avoid damage to the mounting points. Regularly check the attachment of the rear case to your electric mobility scooter to ensure that it is firmly and securely attached. Wipe the rear case regularly with a soft, damp cloth to remove dirt and dust. Avoid contact with sharp objects or aggressive chemicals to prevent scratches or damage to the surface. You can find suitable and optimized cleaning agents specially developed for our electric vehicles in the accessories section below:

For E-Trike 25 models with white rear basket. The chassis number begins with "L."

This practical holder was specially developed for our DEISLA DS3-15/25 & DS4-15/25 electric mobility scooters, but is also compatible with many other models of similar design. The holder allows you to safely transport walking sticks, forearm crutches, and larger umbrellas—without any complicated assembly. It can be attached without tools using practical star screws and can be easily removed if necessary. The holder can be mounted on either side, allowing you to safely transport two walking aids at the same time. Thanks to rubberized rollers and spacers (clamping system), your walking aid or umbrella stays firmly in place without slipping or being damaged. This holder system is suitable for almost all standard walking aids and umbrellas with a shaft diameter of up to approx. 3.5 cm. The carrier has been designed so that you can easily reach your walking aid or umbrella without having to stretch or reach awkwardly. This means that you can insert and remove items even while seated. The spacious drip tray provides a secure hold for walking aids with "rubber feet" up to 10 cm in diameter. This prevents the walking stick from slipping or falling out during travel. Two integrated drainage holes in the catch tray ensure that rainwater does not accumulate – ensuring reliable functionality even in less than ideal weather conditions. The holder has a black powder coating. This not only protects against weathering and scratches, but also ensures a harmonious look that blends inconspicuously into the design of your electric mobility scooter. Made of sturdy metal, the holder offers high stability and resilience. It remains stable and durable even with frequent use. Note: The holder is designed for normal walking sticks, forearm supports, and umbrellas weighing up to 1.5 kg. Please avoid placing particularly heavy or bulky items in the holder. Excessive loads can damage the holder over time or impair the stability of the electric mobility scooter. If the cane holder is to be installed on a third-party vehicle, please check compatibility in advance. Technical data: - Length: approx. 23 cm Width: approx. 10 cm Height: approx. 49 cm - Diameter (collection tray): approx. 10 cm - Mounting bracket (for attaching to the vehicle): approx. 2.3 cm - Pole diameter (from stick or umbrella): max. 3.5 cm - Weight: approx. 0.9 kg - Max. load capacity: approx. 1.5 kg - Material: metal - Color: Black Care instructions: - Clean the holder regularly with a soft, damp cloth to remove dirt and deposits. - If necessary, use a mild soap solution, but do not use aggressive cleaning agents to avoid damaging the coating. - Check the fastenings at regular intervals and tighten them if necessary. - Dry after rain or moisture to prevent corrosion/rust and increase durability. - If the rubberized retaining elements are dirty, they can be cleaned with water and a mild detergent.

Only for Rolektro model E-City 45 Retro

Cable ties – versatile everyday helpers for organization and safety Cable ties, also known as cable bands or cable straps, are universal, quick-to-use, and inexpensive fasteners that were originally developed for securing cables and cable harnesses. Today, they are indispensable in industry, trade, household, and even horticulture. The durable cable ties are not only used for bundling and organizing cables, but also for temporary assembly, as a packaging aid, or even as emergency handcuffs in the security sector. Our high-quality Hermax cable ties made of robust nylon PA66 (polyamide 66) in black offer a reliable and versatile solution for bundling and fastening cables, wires, hoses, pipes, components, garden plants, and much more—both indoors and outdoors. Suitable for household, garden, creative hobbies & DIY projects, workshops, trade fair construction, electrical installations, automotive applications, and many other uses, our nylon cable ties impress with their excellent load-bearing capacity, weather resistance, and versatility. Technical data: Set contents: 100 pieces (various lengths and widths available) Length x width: 130 x 2.5 mm Material: Nylon PA66 (polyamide 6.6) Temperature range: -40°C to +85°C Tensile strength: Up to 8 kg / 18 lb Bundle diameter: 3 mm to 30 mm Color: Black (UV-resistant) Standards: UL-94 V2, RoHS, etc. Cable ties work on a simple but effective snap-lock principle: a toothed strip is pulled through a head with a snap-lock element and locked in place so that the tie cannot come loose by itself. The reusable models also feature a release mechanism for loosening and resealing. Cable ties are practical and safe when used properly. Observe the load limits, avoid excessive tightening, and ensure safe disposal. This will minimize risks to people and materials. How to use a cable tie correctly 1. Select a cable tie in the appropriate length and width for your project. Make sure that the tie is long enough to enclose the entire bundle. 2. Ensure that the cables or objects are clean and neatly arranged. Remove any dirt or excess material so that the cable tie holds optimally. 3. Pass the pointed end of the cable tie around the cables or objects and insert it through the opening in the head of the cable tie to form a loop. 4. Pull the end of the cable tie slowly and evenly until the bundle is held securely together. Be careful not to pull too tightly to avoid damaging cables or material. With reusable cable ties, you can release the locking mechanism later. 5. Cut the excess end of the cable tie flush with the head to avoid sharp edges and prevent injury. Special cable tie pliers can tighten and cut in one step. Safety instructions - Hermax cable tie sets may only be used within their specified load limits and for their intended purpose. - Do not use cable ties as a substitute for safety-related fastenings such as straps or load-bearing connections. - Do not tighten excessively to avoid damaging cables or bundled items - Always ensure that the cut end does not leave any sharp edges - Never cut plastic cable ties with a carpet knife or sharp tools, as this can easily damage cables or pipes - Store cable ties in a dry place at a constant temperature - Keep cable ties away from small children, as there is a risk of swallowing and strangulation - Cable ties should be disposed of in plastic waste after use. Ensure environmentally friendly disposal to avoid pollution

Only for Rolektro model Fun20 V.2

Keep your personal belongings safe and secure while you're on the go with our lockable case for scooters. This reliable rear case is the ideal solution for anyone who needs extra storage space for their shopping or personal items. Made from sturdy plastic, this top case is temperature-resistant and weatherproof, so your belongings are always protected on the go. With a volume of approximately 25 liters, it offers enough storage space for your handbag, small backpack, groceries, medications, personal items, and much more. The practical storage case is equipped with a red reflector for added visibility and safety. The ergonomically shaped backrest provides additional comfort and support while riding. The lockable function of the luggage rack ensures additional security for your valuables while riding. The rear carrier comes complete with 2 keys and mounting accessories for quick and easy installation. Warning! Never leave both keys in the top case! Technical data: Dimensions (LxWxH): 29 x 31 x 21 cm Volume: approx. 25 liters (perfect for small handbags and backpacks) Weight: 850 g Maximum load: 6 kg Material: 90% plastic, 10% metal The top case is compatible with the following Rolektro vehicle model: -E-Joy 45 The transport case can also be attached to comparable vehicles from other manufacturers. However, please note that there may be differences and incompatibilities with vehicles from third-party manufacturers. Any damage resulting from this is not covered by the warranty. Maintenance and care instructions: Pay attention to the maximum permissible load capacity of the case so as not to overload it and avoid damage to the mounting points. Regularly check the attachment of the rear case to your senior mobility scooter to ensure that it is firmly and securely attached. Wipe the rear case regularly with a soft, damp cloth to remove dirt and dust. Avoid contact with sharp objects or aggressive chemicals to prevent scratches or damage to the surface. You can find suitable and optimized cleaning agents specially developed for our electric vehicles in the accessories section below:

This high-quality cell phone holder has been specially developed for all E-joy models. It impresses with its robust construction and integrated charging function, allowing you to securely attach your smartphone while supplying it with power—ideal for everyday use and long tours. Sturdy construction Thanks to the reinforced ABS construction and non-slip rubber arms, your smartphone remains securely fixed even on uneven roads. Integrated USB charging port Conveniently charge your cell phone while driving—perfect for navigation or music apps. Reliable power supply The waterproof connection cable with blue 2-pin plug ensures a stable power supply, even in rain or high humidity. Easy one-handed operation There is an adjustment button on the lower right-hand side that allows the holding arms to be flexibly adjusted to different smartphone sizes. The width is infinitely adjustable from 50 to 90 mm. The arms open gently with just one press – ideal for quick one-handed operation. Easy installation The mount is easy to install and fits handlebars with a diameter of 22 mm. Technical data: Dimensions (LxWxH): 6.8 x 5.5 x 10.7 cm Weight: 126 g Material: 90% plastic, 10% rubber Scope of delivery: 1× cell phone holder The mobile device holder can also be attached to comparable vehicles from other manufacturers. However, please note that there may be differences and incompatibilities with vehicles from third-party manufacturers. Any damage resulting from this is not covered by the warranty!

Only for Rolektro model E-Joy 20

6-teiliges Reinigungstuch-Set für E-Roller, E-Scooter, E-Bike, Fahrrad & Motorrad Sauberkeit, die bewegt. Mit unserem hochwertigen 6-teiligen Reinigungstuch-Set bleibt Ihr Fahrzeug jederzeit gepflegt und einsatzbereit. Die speziell ausgewählten Mikrofasertücher sorgen für eine gründliche, schonende Reinigung aller wichtigen Bereiche. Die moderne Farbkombination aus Schwarz, Anthrazit und Mintgrün verleiht dem Set nicht nur eine hochwertige Optik, sondern hilft auch dabei, die Tücher unterschiedlichen Reinigungsbereichen zuzuordnen. Für jede Oberfläche das passende Tuch Das Set enthält 6 verschiedene Reinigungstücher für eine optimale Pflege von: - Karosserie und Kunststoffteilen – entfernt Staub, Schmutz und Fingerabdrücke schonend und streifenfrei. - Spiegeln und Glasflächen – für klare Sicht und glänzende Ergebnisse ohne Rückstände. - Sitzflächen und Innenbereichen – ideal zur sanften Reinigung von Polstern, Armlehnen und Bedienelementen. - Rädern und schwer zugänglichen Stellen – erreicht auch Ecken, Kanten und Zwischenräume mühelos. Ihre Vorteile auf einen Blick • 6 hochwertige Mikrofasertücher für unterschiedliche Einsatzbereiche • Schonende Reinigung ohne Kratzer • Hohe Schmutz- und Feuchtigkeitsaufnahme • Wiederverwendbar und langlebig • Modernes Design in Schwarz, Anthrazit und Mintgrün • Perfekt für E-Roller, Seniorenmobile und weitere Fahrzeuge Verleihen Sie Ihrem Fahrzeug den gepflegten Auftritt, den es verdient. Mit dem 6-teiligen Reinigungstuch-Set wird die Fahrzeugpflege einfach, effizient und komfortabel. Für langanhaltende Sauberkeit und ein rundum gutes Fahrgefühl.

Cable ties – versatile everyday helpers for organization and safety Cable ties, also known as cable bands or cable straps, are universal, quick-to-use, and inexpensive fasteners that were originally developed for securing cables and cable harnesses. Today, they are indispensable in industry, trade, household, and even horticulture. The durable cable ties are not only used for bundling and organizing cables, but also for temporary assembly, as a packaging aid, or even as emergency handcuffs in the security sector. Our high-quality Hermax cable ties made of robust nylon PA66 (polyamide 66) in black offer a reliable and versatile solution for bundling and fastening cables, wires, hoses, pipes, components, garden plants, and much more—both indoors and outdoors. Suitable for household, garden, creative hobbies & DIY projects, workshops, trade fair construction, electrical installations, automotive applications, and many other uses, our nylon cable ties impress with their excellent load-bearing capacity, weather resistance, and reusability. Technical data: Set contents: 100 pieces (various lengths and widths available) Length x width: 1168 x 8.8 mm Material: Nylon PA66 (polyamide 6.6) Temperature range: -40°C to +85°C Tensile strength: Up to 79 kg / 175 lb Bundle diameter: 8.5 mm to 340 mm Reusable: Yes, with special locking mechanism Color: Black (UV-resistant) Standards: UL-94 V2, RoHS, etc. Cable ties work on a simple but effective snap-lock principle: a toothed strip is pulled through a head with a snap-lock element and locked in place so that the tie cannot come loose by itself. The reusable models also feature a release mechanism for loosening and resealing. Cable ties are practical and safe when used properly. Observe the load limits, avoid excessive tightening, and ensure safe disposal. This will minimize risks to people and materials. How to use a cable tie correctly 1. Select a cable tie in the appropriate length and width for your project. Make sure that the tie is long enough to enclose the entire bundle. 2. Ensure that the cables or objects are clean and neatly arranged. Remove any dirt or excess material so that the cable tie holds optimally. 3. Pass the pointed end of the cable tie around the cables or objects and insert it through the opening in the head of the cable tie to form a loop. 4. Pull the end of the cable tie slowly and evenly until the bundle is held securely together. Be careful not to pull too tightly to avoid damaging cables or material. With reusable cable ties, you can release the locking mechanism later. 5. Cut the excess end of the cable tie flush with the head to avoid sharp edges and prevent injury. Special cable tie pliers can tighten and cut in one step. Safety instructions - Hermax cable tie sets may only be used within their specified load limits and for their intended purpose. - Do not use cable ties as a substitute for safety-related fastenings such as straps or load-bearing connections. - Do not tighten excessively to avoid damaging cables or bundled items - Always ensure that the cut end does not leave any sharp edges - Never cut plastic cable ties with a carpet knife or sharp tools, as this can easily damage cables or pipes - Store cable ties in a dry place at a constant temperature - Keep cable ties away from small children, as there is a risk of swallowing and strangulation - Cable ties should be disposed of in plastic waste after use. Ensure environmentally friendly disposal to avoid pollution

Air pump for city pedelecs

bag only, without batteries and cables

Cable ties – versatile everyday helpers for organization and safety Cable ties, also known as cable bands or cable straps, are universal, quick-to-use, and inexpensive fasteners that were originally developed for securing cables and cable harnesses. Today, they are indispensable in industry, trade, household, and even horticulture. The durable cable ties are not only used for bundling and organizing cables, but also for temporary assembly, as a packaging aid, or even as emergency handcuffs in the security sector. Our high-quality Hermax cable ties made of robust nylon PA66 (polyamide 66) in black offer a reliable and versatile solution for bundling and fastening cables, wires, hoses, pipes, components, garden plants, and much more—both indoors and outdoors. Suitable for household, garden, creative hobbies & DIY projects, workshops, trade fair construction, electrical installations, automotive applications, and many other uses, our nylon cable ties impress with their excellent load-bearing capacity, weather resistance, and versatility. Technical data: Set contents: 100 pieces (various lengths and widths available) Length x width: 200 x 2.5 mm Material: Nylon PA66 (polyamide 6.6) Temperature range: -40°C to +85°C Tensile strength: Up to 8 kg / 18 lb Bundle diameter: 3 mm to 52.5 mm Color: Black (UV-resistant) Standards: UL-94 V2, RoHS, etc. Cable ties work using a simple but effective locking principle: a toothed strip is pulled through a head with a locking element and locked in place so that the tie cannot come loose by itself. The reusable models also feature a release mechanism for loosening and resealing. Cable ties are practical and safe when used properly. Observe the load limits, avoid excessive tightening, and ensure safe disposal. This will minimize risks to people and materials. How to use a cable tie correctly 1. Select a cable tie in the appropriate length and width for your project. Make sure that the tie is long enough to enclose the entire bundle. 2. Ensure that the cables or objects are clean and neatly arranged. Remove any dirt or excess material so that the cable tie holds optimally. 3. Pass the pointed end of the cable tie around the cables or objects and insert it through the opening in the head of the cable tie to form a loop. 4. Pull the end of the cable tie slowly and evenly until the bundle is held securely together. Be careful not to pull too tightly to avoid damaging cables or material. With reusable cable ties, you can release the locking mechanism later. 5. Cut the excess end of the cable tie flush with the head to avoid sharp edges and prevent injury. Special cable tie pliers can tighten and cut in one step. Safety instructions - Hermax cable tie sets may only be used within their specified load limits and for their intended purpose. - Do not use cable ties as a substitute for safety-related fastenings such as straps or load-bearing connections. - Do not tighten excessively to avoid damaging cables or bundled items - Always ensure that the cut end does not leave any sharp edges - Never cut plastic cable ties with a carpet knife or sharp tools, as this can easily damage cables or pipes - Store cable ties in a dry place at a constant temperature - Keep cable ties away from small children, as there is a risk of swallowing and strangulation - Cable ties should be disposed of in plastic waste after use. Ensure environmentally friendly disposal to avoid pollution

The spacious 150L thermobox in the rear can hold plenty of food and drinks. This reliable thermal box is the ideal solution for anyone who needs extra storage space for their shopping or food. Made of sturdy plastic, this XXL luggage rack is temperature-resistant and weatherproof, so your belongings are always protected on the go. The double-walled case has good insulating properties and can maintain a constant internal temperature for up to 4 hours. A cool box or warm box on an e-scooter is practical for delivery services, commuters, or trips where food or drinks need to be transported without losing their temperature. The lockable function of the food transport container ensures additional security for your valuables while on the move. The insulated box comes with 2 keys. Caution! Never leave both keys in the transport case! Technical data: Dimensions (LxWxH): 60 x 45 x 66 cm Volume: approx. 150 liters Weight: 12 kg Maximum load capacity: 24 kg Material: 90% plastic, 10% metal The top case is compatible with Rolektro vehicle models: - Carrier 25 Lead-Gel - Carrier 25V.3 Lithium The transport case can also be attached to comparable vehicles from other manufacturers. However, please note that there may be differences and incompatibilities with vehicles from third-party manufacturers. Any resulting damage is not covered by the warranty. Maintenance and care instructions: Pay attention to the maximum permissible load capacity of the case so as not to overload it and avoid damage to the mounting points. Regularly check the attachment of the rear case to your electric mobility scooter to ensure that it is firmly and securely attached. Wipe the rear case regularly with a soft, damp cloth to remove dirt and dust. Avoid contact with sharp objects or aggressive chemicals to prevent scratches or damage to the surface. You can find suitable and optimized cleaning agents specially developed for our electric vehicles in the accessories section below:

Top case connecting parts, set left and right, for V.3 / R31 models Suitable for all models where the chassis number (VIN) begins with R31....: Trike 15 V.3 Trike 25 V.3 Quad 15 V.3 Quad 25 V.3

Cable ties – versatile everyday helpers for organization and safety Cable ties, also known as cable bands or cable straps, are universal, quick-to-use, and inexpensive fasteners that were originally developed for securing cables and cable harnesses. Today, they are indispensable in industry, trade, household, and even horticulture. The durable cable ties are not only used for bundling and organizing cables, but also for temporary assembly, as a packaging aid, or even as emergency handcuffs in the security sector. Our high-quality Hermax cable ties made of robust nylon PA66 (polyamide 66) in black offer a reliable and versatile solution for bundling and fastening cables, wires, hoses, pipes, components, garden plants, and much more—both indoors and outdoors. Suitable for household, garden, creative hobbies & DIY projects, workshops, trade fair construction, electrical installations, automotive applications, and many other uses, our nylon cable ties impress with their excellent load-bearing capacity, weather resistance, and versatility. Technical data: Set contents: 100 pieces (various lengths and widths available) Length x width: 100 x 3.6 mm Material: Nylon PA66 (polyamide 6.6) Temperature range: -40°C to +85°C Tensile strength: Up to 18 kg / 40 lb Bundle diameter: 3.5 mm to 20.5 mm Color: Black (UV-resistant) Standards: UL-94 V2, RoHS, etc. Cable ties work on a simple but effective locking principle: a toothed strip is pulled through a head with a locking element and locked in place so that the tie cannot come loose by itself. The reusable models also feature a release mechanism for loosening and resealing. Cable ties are practical and safe when used properly. Observe the load limits, avoid excessive tightening, and ensure safe disposal. This will minimize risks to people and materials. How to use a cable tie correctly 1. Select a cable tie in the appropriate length and width for your project. Make sure that the tie is long enough to enclose the entire bundle. 2. Ensure that the cables or objects are clean and neatly arranged. Remove any dirt or excess material so that the cable tie holds optimally. 3. Pass the pointed end of the cable tie around the cables or objects and insert it through the opening in the head of the cable tie to form a loop. 4. Pull the end of the cable tie slowly and evenly until the bundle is held securely together. Be careful not to pull too tightly to avoid damaging cables or material. With reusable cable ties, you can release the locking mechanism later. 5. Cut the excess end of the cable tie flush with the head to avoid sharp edges and prevent injury. Special cable tie pliers can tighten and cut in one step. Safety instructions - Hermax cable tie sets may only be used within their specified load limits and for their intended purpose. - Do not use cable ties as a substitute for safety-related fastenings such as straps or load-bearing connections. - Do not tighten excessively to avoid damaging cables or bundled items - Always ensure that the cut end does not leave any sharp edges - Never cut plastic cable ties with a carpet knife or sharp tools, as this can easily damage cables or pipes - Store cable ties in a dry place at a constant temperature - Keep cable ties away from small children, as there is a risk of swallowing and strangulation - Cable ties should be disposed of in plastic waste after use. Ensure environmentally friendly disposal to avoid pollution

The TONARO HE 1900 inverter generator is lightweight, compact, and very quiet compared to other models, with a noise level of only approx. 65 dB(A) – making it the ideal backup power source for almost all devices with 230V AC voltage. Thanks to sine wave inverter technology, the voltage generated is independent of the engine speed and remains constant. The inverter produces a pure sine wave voltage, which is ideal for the safe operation of sensitive electrical devices such as computers, televisions, notebooks, smartphones, etc. The intelligent Eco mode helps to save fuel and reduce the noise level of the device. The engine speed automatically and precisely adjusts to the corresponding load. The engine is also fully enclosed by the housing, reducing the noise level to a quiet 65 dB (A), measured at a distance of 8 m. Long operating times with one fill. The 5.2 l gasoline tank allows for up to 14 hours of operation with an average consumption of 0.37 l/hour. When using an 11 l propane gas cylinder, operation for up to 45 hours is possible. Extensive safety features protect you and your inverter. The HE 1900 switches off automatically in the event of low oil levels or overload and is protected against short circuits. Need more power than you thought? No problem. Our TONARO inverter allows two HE 1900 generators to be operated in parallel. The inverter can be connected using a parallel kit (optional) and a second HE 1900 (optional). This combination almost doubles the power output. The generator labeling and the manual (with many illustrations) are written in German and are easy to understand. Technical data: Model: HE 1900 Type: Inverter Starting method: Reversible/rope starter (Easy-Pull technology) Type: Single-phase Voltage: 230 V Frequency: 50 Hz DC output: 12V / 8.3A Charging current Rated power (gasoline): 1900 W Nominal power (propane gas): 1700 W Maximum power (gasoline): 2300 W Maximum power (propane gas): 2100 W Connections: 1 x grounded outlet (230 V), 1 x direct current (12 V) Insulation class: F Operating noise: 65 dB(A) at 7 m Temperature: max. 400 C Dimensions: 570 x 365 x 555 mm Weight (empty): 24.5 kg Running time (gasoline): Up to 14 hours = 0.37 L/hour Runtime (propane gas): Up to 40-45 hours (with 11 kg gas cylinder) Engine type: Single cylinder, 4-stroke Displacement: 80 cm3 Fuel: Gasoline (unleaded) / propane gas (can be operated with either fuel independently) Oil tank capacity: 400 ml Fuel tank capacity: 5.2 liters Spark plug: E7RTC Scope of delivery: 1 x dual inverter generator 1 x Oil funnel 1 x spark plug wrench 1 x gas hose with connection to a German propane gas cylinder 1 x plastic clamp holder with 4 screws for the gas hose 1 x rubber protective contact plug 1 x battery charging cable in black and red 1 x manual in German

Only for Rolektro model E-Carrier25V2/V3

The Rolektro care/cleaning set for e-scooters, e-bikes, bicycles, and motorcycles consists of: - 500 ml Rolektro special cleaner for e-scooters, e-bikes, bicycles, and motorcycles - 500 ml Rolektro tire care - 500 ml brake, chain, and parts cleaner 500 ml Rolektro special cleaner for e-scooters, e-bikes, bicycles, motorcycles Rolektro Special Cleaner for e-scooters, e-bikes, bicycles, motorcycles, etc. is a highly effective cleaner that has been specially developed for the thorough cleaning of various vehicles. With its powerful cleaning ability, it effortlessly removes all types of dirt and eliminates stubborn road grime deposits. This cleaning agent is ideal for removing dirt from car body parts, plastic, chrome, aluminum, and glass. Whether your vehicle or bicycle is dirty with mud, dust, insect remains, or other contaminants, the Rolektro cleaning solution ensures thorough cleanliness and a shiny result. Rolektro Special Cleaner is very easy to use. First, spray the cleaning agent onto the dirty surface. Then leave the cleaning fluid to work for a few minutes so that it can take full effect. Afterwards, rinse the treated area thoroughly with clean water or wipe it with a damp cloth. You will be amazed at how effortlessly the dirt is removed and your vehicle shines like new. In addition, Rolektro Special Cleaner is particularly gentle on the treated surfaces. It does not attack paint or plastic and leaves no unwanted residues. This means you can use it on the various materials mentioned above without worrying about causing damage. The handy bottle of Rolektro Special Cleaner has no sharp edges or unpleasant unevenness that could interfere with use. You can rest assured that the bottle is safe and comfortable to hold. The ergonomic handle is designed to be comfortable to hold and prevent slipping. This makes the cleaner even more comfortable to use. The nozzle can be completely locked to prevent accidental spillage or spraying when the detergent is not in use. The spray head of the cleaner has an adjustable function that allows you to set either a concentrated jet or a fine mist atomizer. This allows you to apply the detergent precisely and effectively. With its powerful care formula, Rolektro Special Solution ensures thorough cleaning and long-lasting cleanliness. The special cleaner is suitable for both occasional home use and professional use. Important information: - Keep out of reach of children. - Set the spray nozzle to OFF after use. - Store the bottle upright in a dry, cool place. - Empty the bottle completely before recycling. 500 ml Rolektro Tire Care Rolektro Tire Care is the ideal solution for the care and protection of all types of tires. Whether you own an electric car, e-scooter, bicycle, or motorcycle, this tire protection will help you keep your tires in top condition.  The handy 500 ml bottle is equipped with a practical spray head that has both a jet and a mist function for easy and effective application. The jet mode allows you to apply the tire care product precisely, while the mist mode allows for large-area application to distribute the care solution evenly. Rolektro Tire Care offers a high-quality formula that has been specially developed to extend the life of your tires and give them a fresh look. The formula contains carefully selected ingredients that provide optimal care and protection without damaging the tire surface. It helps protect the tire from harmful environmental influences such as UV rays, dirt, dust, and weather conditions. Applying Rolektro tire care product is very easy. Before application, the tires should be thoroughly cleaned and free of dirt. Shake the bottle well to activate the solvent and spray it evenly onto the tire surface. Spread the care product evenly over the tire sidewall with a sponge. After applying the tire care product, leave it to work for a few minutes and dry. Wipe off any residue. Overall, Rolektro tire care is the perfect choice for improving the life and appearance of your tires. It is suitable for both occasional home use and professional use. Important information: - Keep out of reach of children. - Avoid contact with brake discs and brake pads. - Empty the bottle completely before recycling. 500 ml brake, chain, and parts cleaner Rolektro brake cleaner is a high-quality cleaning product specially developed for the thorough removal of dirt from brakes, chains, and other parts of e-scooters, e-bikes, bicycles, and motorcycles. With its handy 500 ml bottle and practical spray head, it is easy to use and enables effective cleaning in a variety of applications. Brake pads and brake discs can become clogged with dirt and debris over time, which can impair braking performance. With this cleaner, you can thoroughly clean the brakes and restore optimal braking performance. It is also ideal for cleaning chains, sprockets, and other moving parts to ensure smooth operation and a longer service life. Rolektro cleaning agent is characterized by its effective cleaning formula, which has been specially developed to remove even the most stubborn dirt. It quickly penetrates the dirt, dissolves grease, oil, and other contaminants, and leaves the treated parts clean and free of residue. The bottle is compact and handy, so it can be held comfortably in the hand. The spray head of the cleaner has a jet and mist function, which allows the cleaning fluid to be applied precisely and evenly to the parts to be cleaned. The jet mode is ideal for removing stubborn dirt and deposits, while the mist mode allows for large-area application. Applying the cleaning solution is easy: spray Rolektro Brake/Chain and Parts Cleaner onto the parts to be cleaned and leave it to work for a short time. You can then wipe off the dirt with a soft cloth or brush. Stubborn dirt may require a longer application time. After cleaning, it is recommended to rinse the cleaned parts thoroughly with water and then allow them to dry before using them again. Rolektro Cleaner is a versatile cleaning product that can be used in a variety of areas. Whether you want to remove dirt from your brakes, clean your bicycle chain, or polish your motorcycle parts to a high shine, this cleaner is the right choice. It is suitable for both occasional home use and professional use. Important information: - Keep out of reach of children! - Keep locked away! - May be fatal if swallowed and enters airways. - Dispose of contents/container in accordance with national regulations.

Cable ties – versatile everyday helpers for organization and safety Cable ties, also known as cable bands or cable straps, are universal, quick-to-use, and inexpensive fasteners that were originally developed for securing cables and cable harnesses. Today, they are indispensable in industry, trade, household, and even horticulture. The durable cable ties are not only used for bundling and organizing cables, but also for temporary assembly, as a packaging aid, or even as emergency handcuffs in the security sector. Our high-quality Hermax cable ties made of robust nylon PA66 (polyamide 66) in black offer a reliable and versatile solution for bundling and fastening cables, wires, hoses, pipes, components, garden plants, and much more—both indoors and outdoors. Suitable for household, garden, creative hobbies & DIY projects, workshops, trade fair construction, electrical installations, automotive applications, and many other uses, our nylon cable ties impress with their excellent load-bearing capacity, weather resistance, and reusability. Technical data: Set contents: 100 pieces (various lengths and widths available) Length x width: 300 x 7.6 mm Material: Nylon PA66 (polyamide 6.6) Temperature range: -40°C to +85°C Tensile strength: Up to 54 kg /120 lb Bundle diameter: 8.5 mm to 82.8 mm Reusable: Yes, with special locking mechanism Color: Black (UV-resistant) Standards: UL-94 V2, RoHS, etc. Cable ties work on a simple but effective snap-lock principle: a toothed strip is pulled through a head with a snap-lock element and locked in place so that the tie cannot come loose on its own. The reusable models also feature a release mechanism for loosening and resealing. Cable ties are practical and safe when used properly. Observe the load limits, avoid excessive tightening, and ensure safe disposal. This will minimize risks to people and materials. How to use a cable tie correctly 1. Select a cable tie in the appropriate length and width for your project. Make sure that the tie is long enough to enclose the entire bundle. 2. Ensure that the cables or objects are clean and neatly arranged. Remove any dirt or excess material so that the cable tie holds optimally. 3. Pass the pointed end of the cable tie around the cables or objects and insert it through the opening in the head of the cable tie to form a loop. 4. Pull the end of the cable tie slowly and evenly until the bundle is held securely together. Be careful not to pull too tightly to avoid damaging cables or material. With reusable cable ties, you can release the locking mechanism later. 5. Cut the excess end of the cable tie flush with the head to avoid sharp edges and prevent injury. Special cable tie pliers can tighten and cut in one step. Safety instructions - Hermax cable tie sets may only be used within their specified load limits and for their intended purpose. - Do not use cable ties as a substitute for safety-related fastenings such as straps or load-bearing connections. - Do not tighten excessively to avoid damaging cables or bundled items - Always ensure that the cut end does not leave any sharp edges - Never cut plastic cable ties with a carpet knife or sharp tools, as this can easily damage cables or pipes - Store cable ties in a dry place at a constant temperature - Keep cable ties away from small children, as there is a risk of swallowing and strangulation - Cable ties should be disposed of in plastic waste after use. Ensure environmentally friendly disposal to avoid pollution

This safety box was specifically designed for the safe storage and charging of lithium batteries—ideal for electric vehicles such as e-scooters, electric scooters, mobility scooters, pedelecs, and e-bikes. It is also suitable for numerous other lithium batteries, provided their size and capacity are compatible. The robust steel construction with 40 mm ceramic fiber insulation provides reliable protection against heat and fire in an emergency. Tested according to EN 1363-1:2020, it offers 60 minutes of fire resistance. The integrated charging port allows for safe charging while the box is closed, without having to remove the batteries from the protective environment. In addition, the safety box is equipped with a condensed aerosol fire extinguisher. This modern extinguishing system was developed specifically for enclosed spaces and activates automatically in the event of a fire when high temperatures are detected. Within seconds, the extinguishing aerosol spreads evenly throughout the interior of the box, helping to contain emerging fires at an early stage and reduce further spread. The pressureless system uses a non-toxic and non-corrosive extinguishing agent and offers a maintenance-free service life of up to 10 years. For maximum flexibility, the box is equipped with four heavy-duty casters, two of which are lockable. This allows it to be moved easily and secured stably when needed. Whether for vehicle and bicycle batteries, model-making, drone, or power tool batteries—the safety box creates a reliable charging and storage environment for both private users and commercial applications. Key Features Safe Charging & Storage – Fire protection and charging function in one system Additional protection through an integrated aerosol fire extinguisher for automatic fire suppression inside the unit Wide compatibility – Suitable for many common lithium batteries used in e-mobility (e.g., e-scooters, electric scooters, e-bikes, mobility scooters) Tested fire resistance – 60 minutes according to EN 1363-1:2020 Rapid extinguishing effect – thermal activation of the aerosol extinguishing system at approx. 185 °C Mobile & stable – four heavy-duty casters, two of which have locking brakes Integrated direct charging port – includes connection cable, charging adapter, and grounding Space-saving & affordable – ideal solution for private households, workshops, or businesses Technical specifications: External dimensions approx. 520 × 415 × 420 mm Internal dimensions approx. 440 × 335 × 274 mm Packaging dimensions approx. 570 × 490 × 450 mm Material: approx. 1.0 mm steel, interior & exterior Caster wheels: Number: 4 (2 casters with brakes) Material: Heavy-duty casters with rubber tread (floor-friendly, low-noise) Diameter: approx. 50 mm (2") / Width: approx. 24 mm Mounting: Screwed to base plate, metal housing Features: 360° swivel, shock-resistant & low-wear, suitable for smooth floors (e.g., concrete, tile, PVC), secure stance when locked Load capacity (total): approx. 140 kg Coating: Antistatic powder coating Insulation: approx. 40 mm ceramic fiber Fire resistance test: EN 1363-1:2020, 60 minutes Weight (net / gross): approx. 22 kg / 24 kg Current: Charging cable up to max. 5 A Cable length: approx. 50 cm (adapter cable) Compliance: CE marked Material: non-flammable, high-temperature resistant Integrated aerosol fire extinguisher with thermal activation Activation temperature of extinguishing system: approx. 185 °C ± 10 °C Discharge duration of extinguishing agent: approx. 5 seconds Extinguishing agent: strontium nitrate & potassium nitrate Maintenance-free extinguishing system with a service life of up to 10 years Pressureless extinguishing technology for increased safety during storage and operation

Cable ties – versatile everyday helpers for organization and safety Cable ties, also known as cable bands or cable straps, are universal, quick-to-use, and inexpensive fasteners that were originally developed for securing cables and cable harnesses. Today, they are indispensable in industry, trade, household, and even horticulture. The durable cable ties are not only used for bundling and organizing cables, but also for temporary assembly, as a packaging aid, or even as emergency handcuffs in the security sector. Our high-quality Hermax cable ties made of robust nylon PA66 (polyamide 66) in black offer a reliable and versatile solution for bundling and fastening cables, wires, hoses, pipes, components, garden plants, and much more—both indoors and outdoors. Suitable for household, garden, creative hobbies & DIY projects, workshops, trade fair construction, electrical installations, automotive applications, and many other uses, our nylon cable ties impress with their excellent load-bearing capacity, weather resistance, and reusability. Technical data: Set contents: 100 pieces (various lengths and widths available) Length x width: 370 x 4.8 mm Material: Nylon PA66 (polyamide 6.6) Temperature range: -40°C to +85°C Tensile strength: Up to 23 kg / 50 lb Bundle diameter: 3.5 mm to 103.5 mm Reusable: Yes, with special locking mechanism Color: Black (UV-resistant) Standards: UL-94 V2, RoHS, etc. Cable ties work on a simple but effective snap-lock principle: a toothed strip is pulled through a head with a snap-lock element and locked in place so that the tie cannot come loose by itself. The reusable models also feature a release mechanism for loosening and resealing. Cable ties are practical and safe when used properly. Observe the load limits, avoid excessive tightening, and ensure safe disposal. This will minimize risks to people and materials. How to use a cable tie correctly 1. Select a cable tie in the appropriate length and width for your project. Make sure that the tie is long enough to enclose the entire bundle. 2. Ensure that the cables or objects are clean and neatly arranged. Remove any dirt or excess material so that the cable tie holds optimally. 3. Pass the pointed end of the cable tie around the cables or objects and insert it through the opening in the head of the cable tie to form a loop. 4. Pull the end of the cable tie slowly and evenly until the bundle is held securely together. Be careful not to pull too tightly to avoid damaging cables or material. With reusable cable ties, you can release the locking mechanism later. 5. Cut the excess end of the cable tie flush with the head to avoid sharp edges and prevent injury. Special cable tie pliers can tighten and cut in one step. Safety instructions - Hermax cable tie sets may only be used within their specified load limits and for their intended purpose. - Do not use cable ties as a substitute for safety-related fastenings such as straps or load-bearing connections. - Do not tighten excessively to avoid damaging cables or bundled items - Always ensure that the cut end does not leave any sharp edges - Never cut plastic cable ties with a carpet knife or sharp tools, as this can easily damage cables or pipes - Store cable ties in a dry place at a constant temperature - Keep cable ties away from small children, as there is a risk of swallowing and strangulation - Cable ties should be disposed of in plastic waste after use. Ensure environmentally friendly disposal to avoid pollution