This practical holder was specially developed for our E-Quad and E-Trike electric mobility scooters with chassis numbers beginning with R31..., but is also compatible with many other models of similar design. The holder allows walking sticks, forearm crutches, and larger umbrellas to be transported safely. The catch tray is attached to the frame tube below the footboard with a clamp, and the holder is attached to the vehicle on the outside under the armrest through the top case. The holder can be mounted on either side, so that two walking aids can be transported safely at the same time. Thanks to rubberized rollers and spacers (clamp system), your walking aid or umbrella stays firmly in place without slipping or being damaged while driving. This holder system is suitable for almost all common walking aids and umbrellas with a shaft diameter of up to approx. 3.5 cm. The carrier has been designed so that you can easily reach your walking aid or umbrella without having to stretch or reach awkwardly. This means that you can insert and remove items even while seated. The spacious drip tray provides a secure hold for walking aids with "rubber feet" up to 10 cm in diameter. This prevents the walking aid from slipping or falling out during the journey. Two integrated drainage holes in the catch tray ensure that rainwater does not accumulate – ensuring reliable functionality even in less than ideal weather conditions. The holder has a black powder coating. This not only protects against weathering and scratches, but also ensures a harmonious look that blends inconspicuously into the design of your electric mobility scooter. Made of sturdy metal, the holder offers high stability and resilience. It remains stable and durable even with frequent use. Note: The holder is designed for normal walking sticks, forearm supports, and umbrellas weighing up to 1.5 kg. Please avoid placing particularly heavy or bulky items in the holder. Excessive loads can damage the holder over time or impair the stability of the electric mobility scooter. If the cane holder is to be installed on a third-party vehicle, please check compatibility in advance. Technical data: - Diameter (collection tray): approx. 10 cm - Threaded rod (for attaching to the vehicle): approx. 6 cm long x M6 - Rod diameter (from cane or umbrella): max. 3.5 cm - Weight: approx. 0.9 kg - Max. load capacity: approx. 1.5 kg - Material: metal - Color: Black Care instructions: - Clean the holder regularly with a soft, damp cloth to remove dirt and deposits. - If necessary, use a mild soap solution, but do not use aggressive cleaning agents to avoid damaging the coating. - Check the fastenings at regular intervals and tighten them if necessary. - Dry after rain or moisture to prevent corrosion/rust and increase durability. - If the rubberized retaining elements are dirty, they can be cleaned with water and a mild detergent.

This practical holder was specially developed for our E-Quad 6 and E-Trike 6 electric mobility scooters, but is also compatible with many other models of similar design. The holder allows you to safely transport walking sticks, forearm crutches, and larger umbrellas—without any complicated assembly. It can be attached without tools using practical star screws and can be easily removed if necessary. The holder can be mounted on both sides, allowing two walking aids to be transported safely at the same time. Thanks to rubberized rollers and spacers (clamping system), your walking aid or umbrella stays firmly in place without slipping or being damaged. This holder system is suitable for almost all standard walking aids and umbrellas with a shaft diameter of up to approx. 3.5 cm and can be securely attached to shafts (frame tubes) with a width of up to 2 cm. The holder has been designed so that you can easily reach your walking aid or umbrella without having to stretch or reach awkwardly. This makes it particularly user-friendly and comfortable to use. The spacious drip tray provides a secure hold for walking aids with "rubber feet" up to 10 cm in diameter. This prevents the walking aid from slipping or falling out while driving. Two integrated drainage holes in the tray ensure that rainwater does not accumulate – ideal for use in bad weather. The holder has a black powder coating. This not only protects against weathering and scratches, but also ensures a timeless look that blends inconspicuously into the design of your electric mobility scooter. Made of durable metal, the holder offers high stability and resilience. It remains reliable and durable even with frequent use. Note: The holder is designed for normal walking sticks, forearm supports, and umbrellas weighing up to 1.5 kg. Please avoid placing particularly heavy or bulky items in the holder. Excessive loads can damage the holder over time or impair the stability of the electric mobility scooter. If the cane holder is to be installed on a third-party vehicle, please check compatibility yourself in advance. Technical data: Length: approx. 20 cm Width: approx. 10 cm Height: approx. 48.5 cm Diameter (collection tray): approx. 10 cm Mounting bracket (for attaching to the vehicle): approx. 2.3 cm Rod diameter (from stick or umbrella): max. 3.5 cm Weight: approx. 0.935 kg Max. load capacity: approx. 1.5 kg Material: metal Color: Black Care instructions: - Clean the holder regularly with a soft, damp cloth to remove dirt and deposits. - If necessary, use a mild soap solution, but do not use aggressive cleaning agents to protect the coating. - Check the fastenings at regular intervals and tighten them if necessary. - Dry after rain or moisture to prevent corrosion and increase durability. - If the rubberized retaining elements are dirty, they can be cleaned with water and a mild detergent.

This practical holder was specially developed for our DEISLA DS3-15/25 & DS4-15/25 electric mobility scooters, but is also compatible with many other models of similar design. The holder allows you to safely transport walking sticks, forearm crutches, and larger umbrellas—without any complicated assembly. It can be attached without tools using practical star screws and can be easily removed if necessary. The holder can be mounted on either side, allowing you to safely transport two walking aids at the same time. Thanks to rubberized rollers and spacers (clamping system), your walking aid or umbrella stays firmly in place without slipping or being damaged. This holder system is suitable for almost all standard walking aids and umbrellas with a shaft diameter of up to approx. 3.5 cm. The carrier has been designed so that you can easily reach your walking aid or umbrella without having to stretch or reach awkwardly. This means that you can insert and remove items even while seated. The spacious drip tray provides a secure hold for walking aids with "rubber feet" up to 10 cm in diameter. This prevents the walking stick from slipping or falling out during travel. Two integrated drainage holes in the catch tray ensure that rainwater does not accumulate – ensuring reliable functionality even in less than ideal weather conditions. The holder has a black powder coating. This not only protects against weathering and scratches, but also ensures a harmonious look that blends inconspicuously into the design of your electric mobility scooter. Made of sturdy metal, the holder offers high stability and resilience. It remains stable and durable even with frequent use. Note: The holder is designed for normal walking sticks, forearm supports, and umbrellas weighing up to 1.5 kg. Please avoid placing particularly heavy or bulky items in the holder. Excessive loads can damage the holder over time or impair the stability of the electric mobility scooter. If the cane holder is to be installed on a third-party vehicle, please check compatibility in advance. Technical data: - Length: approx. 23 cm Width: approx. 10 cm Height: approx. 49 cm - Diameter (collection tray): approx. 10 cm - Mounting bracket (for attaching to the vehicle): approx. 2.3 cm - Pole diameter (from stick or umbrella): max. 3.5 cm - Weight: approx. 0.9 kg - Max. load capacity: approx. 1.5 kg - Material: metal - Color: Black Care instructions: - Clean the holder regularly with a soft, damp cloth to remove dirt and deposits. - If necessary, use a mild soap solution, but do not use aggressive cleaning agents to avoid damaging the coating. - Check the fastenings at regular intervals and tighten them if necessary. - Dry after rain or moisture to prevent corrosion/rust and increase durability. - If the rubberized retaining elements are dirty, they can be cleaned with water and a mild detergent.

This practical holder was specially developed for our E-Trike and E-Quad electric mobility scooters with chassis numbers beginning with R26..., but is also compatible with many other models of similar design. The holder allows walking sticks, forearm crutches, and larger umbrellas to be transported safely. The retaining ring is attached to the frame tube below the footboard, and the holder is attached to the vehicle on the outside under the armrest through the top case. This holder system is suitable for almost all common walking aids and umbrellas. The carrier has been designed so that you can easily reach your walking aid or umbrella without having to stretch or reach awkwardly. This means that you can insert and remove items even while seated. The retaining ring secures walking aids with "rubber feet" up to 10 cm in diameter. This prevents the walking aid from slipping or falling out while driving. The simple look of the cane holder blends inconspicuously into the design of your electric mobility scooter. Made of sturdy metal, the holder offers high stability and resilience. It remains stable and durable even with frequent use. Note: The holder is designed for normal walking sticks, forearm supports, and umbrellas weighing up to 1.5 kg. Please avoid placing particularly heavy or bulky items in the holder. Excessive loads can damage the holder over time or impair the stability of the electric mobility scooter. If the cane holder is to be installed on a third-party vehicle, please check compatibility in advance. Technical data: - Length: approx. 24 cm - Width: approx. 11 cm - Height: approx. 1.2 cm - Diameter (mounting ring): approx. 10 cm - Mounting bracket (for attaching to the vehicle): approx. 2.3 cm - Pole diameter (from stick or umbrella): max. 5 cm - Weight: approx. 0.3 kg - Max. load capacity: approx. 1.5 kg - Material: metal - Color: stainless steel Care instructions: - Clean the holder regularly with a soft, damp cloth to remove dirt and deposits. - If necessary, use a mild soap solution, but do not use aggressive cleaning agents to avoid damaging the coating. - Check the fastenings at regular intervals and tighten them if necessary. - Dry after rain or moisture to prevent corrosion/rust and increase durability. - If the rubberized retaining elements are dirty, they can be cleaned with water and a mild detergent.